Pumps/Inflation

Topeak's Joe Blow Sport II quickly inflates tires thanks to its durable steel barrel and base, a tight-sealing aluminum thumblock head that fits Presta and Schrader valves as well as an oversized, padded handle. Plus, the easy-to-read gauge lets you dial in the perfect pressure every time!

Topeak's RaceRocket boasts aluminum construction for superb function, durability, and max pumping power. Its small size easily fits into a jersey pocket and with a capacity of 120 psi you'll have no problem getting rolling again. The RaceRocket's extendable hose with SmartHead fits both Presta and Schrader valves and lets you pump from a more comfortable angle, lessening chances of valve breakage.

- High effeciency design - Lightweight composite construction - Thumb lock release - Reversible Presta/Schrader with bracket

Serfas' FP-35 Floor Pump keeps your tires ready to roll. It sports a rugged aluminum barrel, comfortable ergonomic handle, sturdy nylon base, and an easy-to-read gauge. Inflate anything up to 100 psi thanks to the handy dual valve head.

Keep your suspension pressure dialed-in with RockShox's High-Pressure Fork/Shock Pump. It features an aluminum barrel with an ergonomic handle, a handy finger-tap bleed adjust button for fine-tuning settings, and a large gauge. The hose swivels 360-degrees to fit anywhere.

Keep your suspension pressure dialed-in with RockShox's High-Pressure Fork/Shock Pump. It features an aluminum barrel with an ergonomic handle, a handy finger-tap bleed adjust button for fine-tuning settings, and a large gauge. The hose swivels 360-degrees to fit anywhere. And it handles an astounding 600 psi max.

There’s no easier or more effective way to patch a cut tire on the road or trail than carrying and using Park Emergency Tire Boots (3 per package). These thin, extra-tough patches peel and stick to the insides of tires to repair cuts and contain the tube until you can replace the tire.

Lezyne packed a complete CO2 inflator and tire repair kit in a simple, reusable poly bag. This kit includes a Twin Speed Drive inflator, two threaded 16g CO2 cartridges, Power Levers, and a Smart Kit, all the essentials needed to fill your pack for the unexpected tire repair.

Lezyne's Caddy Sack CO2 is a complete CO2 inflator and tire repair kit in a simple, weather resistant, reusable pouch. This kit includes a Caddy Sack, Twin Speed Drive, two threaded 16g CO2 cartridges, Power Levers, and a Smart Kit, all the essentials needed to fill your pack for the unexpected tire repair.

Want a super-easy way to fix a flat? If you have tubeless tires on your mountain bike, all you need is Genuine Innovations' Tubeless Tire Repair Kit. No interior repair is needed, so you don't have to remove the tire. Just plug the hole with the self-vulcanizing plugs, inflate and ride away. The kit includes an insertion tool and five rope plugs.

Laden with style and cutting-edge features, the Megabar is the ultimate alternative to a track pump when travelling. The slim yet powerful pump is a modern take on the classic frame pump. Traditional high-quality features such as the turned wooden handle and braided stainless steel hose are mixed with modern innovations such as the high-volume aluminium barrel and ‘smart’ head for dual-valve compatibility. - Fits Schrader and Presta - High-quality braided hose - Large volume chamber - Turned wooden handle - Snap-fit frame mount included - Length: 410mm - Capacity: 162cc - Pressure: 50psi / 2.8bar - Body: Aluminium - Hose: Braided steel

Crank Brothers' Gem Floor Pump overs versatility and simplicity in an easy-to-use floor pump. What else do you need? - Foot activated high pressure / high volume switch - Wide stamped steel base for easy pumping - Corrosion resistant aluminum body - Presta /Schrader convertible head - Hidden needle adapter & plastic valve adapter - 160 psi / 11 bar - Bar / psi analog gauge

A reliable floor pump featuring a durable steel barrel, an auto-select head, and a stable base. Fresh air for your tires Nothing slows a cyclist down like an inappropriate amount of tire inflation. Loaded with features like a stable, tip-resistant base, a durable steel barrel, and an auto-select head, the Charger stands ready whenever your tires need a little boost. Product details - Steel construction and replaceable internals provide long-term durability - Auto-select head instantly fits both Presta and Schrader valves - Large, stable base minimizes tipping - Easy-to-read 3-inch base-mounted gauge - Max pressure 160 psi (11bar)

- Extra large 3” psi gauge - AnyValve pump head grips Presta, Schrader and Dunlop valves securely - Durable polypropylene-constructed base - Max 160 psi, 11 BAR - Total height 660 mm - Volume per stroke: 315 cubic centimeters

Versatile high-volume performance in the palm of your hand CONSTRUCTION • Textured Fibre Composite CO2 head, with CNC-machined lightweight aluminum with red anodized pump shaft and non-slip/ machine-textured grips, red anodized end cap HEAD • Lightweight Fibre composite head detaches easily from pump body to be used as a separate CO2 micro-inflator • CNC machined alloy Quick-Flip universal connection adapts instantly to Presta, Schrader or Dunlop valves. Forged aluminum TipFlip lock-on thumb lever ADDED BENEFITS • Can be used as a mini pump or as a twist-to-regulate CO2 inflator • Nonslip texture of main pump body means no-slip in wet, muddy or sweaty conditions • Locking valve means no lost CO2 when inflating • Includes 16g CO2 cartridge, cartridge insulator sleeve, mounting bracket and bolts • Compatible with standard threaded CO2 cartridges • Pressure Rating: 120 psi (pump) • Weight: 148 grams / 0.33 pounds • Length: 20cm / 8 inches

Efficient, high performance mini-hose pump with a serviceable alloy gauge CONSTRUCTION • CNC-machined lightweight aluminum with red anodized pump shaft, nonslip/ machine-textured grips and red anodized air-intake valve HEAD • CNC-machined alloy Quick-Flip universal connection adapts instantly to Presta, Schrader or Dunlop valves • Lever-actuated lock attaches instantly, and will not loosen valve cores ADDED BENEFIT • In-line aluminum pressure gauge • Non-slip texture means no-slip in wet, muddy or sweaty conditions • Mounting bracket and bolts included • Pressure Rating: 120 psi • Weight: 172 grams / 0.38 pounds • Length: 26.7cm / 10.5 inches

A lightweight and efficient mini pump with a locking T-handle for improved comfort and efficiency. - 25mm 6063-T6 aluminum sleeved barrel. - Reversible valve fits Schrader and Presta valves - Thumblock lever holds securely onto valve. - Locking T-handle improves ergonomics and provides better leverage when pumping. - 222mm total length - 120 PSI maximum pressure. - 121g

Lightweight mid-high pressure mini pump with built-in extendable hose and easy-to-read dial pressure gauge. Achieves a higher maximum pressure with less effort. - 20mm Composite barrel. - 30mm dial gauge is accurate to +/- 2 PSI. - TIPFLIP reversible valve with locking lever, fits Schrader and Presta valves. - 160mm extendable hose relieves stress on valve stems. - 265mm total length - 100 PSI Maximum pressure. - 109g

The ultimate pump that should be in every cyclists garage. Air stroke volume is optimized for high pressure but is great for general bicycle use as well. Inflation needles optimize potential non-bike uses. - Stable (240mm x 130mm) fiber composite base - 520mm steel barrel with high strength steel pump shaft - Dual compound premium handle - 110cm premium quality hose - Headrush dual valve connector with alloy valve caps - Precision 51mm mid-mounted gauge - Headrush connector instantly fits Presta or Schrader valves - inflation needles included - 160 PSI Maximum pressure, suitable for all bicycle types, but ideal for 60- 160 PSI tires - 1210g

A durable and accurate shock pump. - Lightweight 6063-T6 aluminum construction. - 300 PSI maximum pressure. - No-loss thread on valve ensure accurate pressure remains in shock when removed. - Double-braided hose ensures long-term durability. - Bleed valve for fine-tuning pressure. - 365mm total length. - 185g

You'll ride with peace of mind when you pack a can of Vittoria's Pit Stop Tire Sealant. It contains pure latex foam sealant and compressed air to quickly inflate and repair your tire so you can get on with your ride. Available in three sizes for varying tire volumes: - Road Racing: inflates 21-28-inch tubulars up to 94 psi and 700c clinchers up to 87 psi so you can ride, instead of walk to the closest pump and top off the tire to full pressure. - 75mL: Repairs and inflates low-volume MTB tires in less than a minute. - 100mL: Repairs and inflates meaty 27.5-inch tires and cross country 29-inch tires in less than a minute.

Topeak's AirBooster Race Pod is a compact and completely self-contained tire inflation kit featuring an AirBooster CO2 inflator, two tire levers, two 16g CO2 cartridges, and a mounting module with strap and neoprene bag. The unique mounting module straps to the seatpost, seat tube, and provides lightning fast access to the AirBooster inflator, extra CO2 cartridge, and tire levers. The Airbooster Race Pod is the perfect CO2 tire repair solution for racing or endurance events.

Ultimate flexibility is a hallmark of the Ninja series, and Ninja CO2 is no exception. Mount it to your bike with most water bottle cages to match the aesthetics that best suit you. The included Micro AirBooster and 2 threaded 16g CO2 cartridges make fixing flats easy with quick access by a simple twist. - Material: Aluminum / Engineering grade plastic - Inflator Head: Presta / Schrader Push to inflate - Inflator Material: CNC aluminum - Compatibility: Non-adjustable water bottle cage - Added Features: 2 threaded 16g CO2 cartridges Compartment for CO2 inflator & cartridges - Size: 16.7 x 9.3 x 5.4 cm / 6.6” x 3.7” x 2.1” - Weight: 191 grams

Topeak's Pocket Rocket boasts an aluminum barrel for superb function, durability and max pump power, while its plastic handle ensures pumping comfort. And, its aluminum thumb-lock head fits both Presta and Schrader valves.

A Schrader valve adapter allows using the JoeBlow Ace floor pump for quickly pumping forks and rear shocks. Built-in air release knob allows fine tuning air pressure.

Topeak's RaceRocket HP boasts aluminum construction for superb function, durability, and max pumping power. Its small size easily fits into a jersey pocket and with a capacity of 160 psi you'll have no problem getting rolling again. The RaceRocket's extendable hose with SmartHead fits both Presta and Schrader valves and lets you pump from a more comfortable angle, lessening chances of valve breakage.

New design in full metal with longer lever for easier use. Lower profile air release button to minimize unintended pressure release. Upgrade any existing pump to the SmartHead DX pump head includes extra long and mounting hardware. - Head: Full metal SmartHead DX1-Fits Presta/Schrader - Material: Aluminum head Rubber hose - Pressure Tuning: Air release button - Size: 8.3 x 5 x 2.6 cm / 3.3” x 2” x 1” (head)-110 cm (hose length) - Weight: 91 grams

The innovative, highly portable dual function bike stand / floor pump is designed for cyclists who travel to races, enjoy cycling vacations or just want the most compact floor pump to store in their race bag or car trunk.

New design in full metal to quickly identify Presta and Schrader sides. Longer lever for easier use. Lower profile air release button to minimize unintended pressure release. Upgrade any existing pump to the TwinHead DX pump head includes extra long and mounting hardware. - Head: Full metal TwinHead DX1 Fits Presta / Schrader / Dunlop - Material: Aluminum head / Rubber hose - Pressure Tuning: Air release button - Size: 8.2 x 5 x 4.3 cm / 3.2” x 2” x 1.7” (head); 110 cm (hose length) - Weight: 100 grams

High-quality, compact, and easy-to-use CO2 cartridges. - 16 Gram Threaded Cartridge - Fits All CO² Pumps That Accept 16G Threaded - Small, Compact, Easy To Use - 1 Box / 20 Cartridge Count Capacity Dependent On Tire Size: - 29×2.0—31 PSI - 26×1.95—40 PSI - 700x23c—130 PSI - 700x28c—86 PSI - 20×2.0—48 PSI - 24×2.0—42 PSI