Tools/Maintenance

Spoke Ruler

Squorx nipple drivers for wheelbuilding and servicing DT wheels with Squorx nipples (Spline One).

Developed for locking the nipple to the spoke during the wheel-building process, preventing the spoke-nipple connection from loosening. - Holds nipples in place but allows for up to 5 adjustments before compound breaks down - Use with light oil for a secure, re-trueable wheel or use by itself for a maximum bond - Developed in conjunction with Loctite - Includes two 10ml bottles

- Swiss made, high precision spoke tension instrument - Measures spoke tension for all types of spokes (including bladed, butted, Ti, etc.) - Aluminum construction with precision dial - Includes injection molded plastic storage case and (Nm)-calibration chart

The DT Swiss truing stand is the stand used by professionals. It is made of precision machined, polished, and anodized aluminum with hardened steel guides and mounts. - High-end quality and easy handling - Quicker wheel building - Compatible with all current bicycle wheels (12" – 29") with quick-release or thru-axle - Three precision multilink arms providing a wide range of contact points - Play-free precision gauges to measure lateral and vertical dish - Extremely stiff and solid clamping

- This tool allows you to swap out the chain rings on Cannondale cranks by removing the spider.

- For adjustment of spoke tension - Compatible with 9 - 15 gauge spoke nipples

- For removal (and installation) of chain link pins - Compatible with 7, 8, 9 and 10-speed chains

- For use with majority of Hex bolts found on a bicycle - 4, 5, 6mm Hex

- For removal of crank arms from cartridge style bottom brackets - Compatible with square taper, Octalink and ISIS bottom brackets - Works with 8mm Hex or large adjustable wrench

- For removal (and installation) of chain link pins - Compatible with 7, 8, 9, 10 and 11-speed chains - Comfortable rubber coated handle improves grip

- 7-pc wrench set includes 1.5, 2, 2.5, 3, 4, 5, 6mm hex wrenches - Long handles for improved grip and reach - Ball-ends allow up to a 25-degree entry angle so you can easily reach around obstructions - Color coated for quick reference

- 3" multitool is compact for easy carry while the 2" tool length provides the leverage you need - Ergonomic rubber coated non-slip side plates for increased grip - 2, 2.5, 3, 4, 5, 6 and 8mm hex, T25, Phillips, Flat

- For removal of cassette-type rear wheel gears - Must be used with compatible cassette lockring tool - Comfortable rubber coated handle improves grip - Fits up to 9sp cassette

- For installation or removal of pedals - Compatible with most pedal axles - Comfortable rubber coated handle improves grip - 15mm wrench size

- All the brushes you need to detail your bike like a pro - Large, ergonomic handles feature an EasyGrip inlay - Tapered brush with soft bristles gets in all the tight, hard-to-reach spots - DuoBrush combines sponges and soft bristles—great for frames and tires - Gear cleaning brush with 3 brush heads makes quick work of drivetrain cleaning

- For clean cutting of bicycle cables and housings - Spring loaded for ease of use - Built-in pick for opening housing liner

- Lightweight and convenient tubeless plug kit - Includes two tools—a tire reamer and a tire fork perfect for mountain bike tires. - Integrated alloy case includes 10 plugs

- For removal of cassette-type rear wheel gears - Must be used with Chain Whip tool when removing lockring - Compatible with Shimano/SRAM cassettes - Comfortable rubber coated handle improves grip

- For careful installation of stem, seatpost and cockpit components - 5Nm fixed torque setting - 3, 4, 5, 6mm Hex, T20, T25 Torx

- Clamp height adjusts from 41.75"- 56.75" (106 to 144 cm) to allow you to work at a comfortable level - Clamp head rotates 360° - The articulating jaw on the clamp provides a large clamp opening, allowing the bike to be easily inserted and removed by flipping the cam lever. - Clamp head is micro-adjustable to accommodate various tube sizes. - No tools required for quick setup and storage - Lightweight aluminum construction - Product Weight: 13.6 lbs (6.18 kg) - Max load capacity: 77 lbs (35 kg)

- Single 29mm open bore drift for use with 1/2" rods

- Installs and removes threaded cups for 386Evo cranks - Socket type tool for 1/2" drive socket wrenches

For extreme conditions, you need an extreme lube. That's when you grab Finish Line's Wet Lubricant. It's ultra water-resistant and long-lasting thanks to its special formulation of synthetic oils, special polymers and anti-wear additives. This lube delivers superb drivetrain lubrication and protection and it's the ultimate choice for muddy off-road rides, all-day epics and long, rainy commutes. - Formulated with high viscosity synthetic oils, water repelling polymers, and advanced anti-wear additives - Will require more attention to drivetrain cleanliness, but delivers the ultimate in lubricity and protection - Upon application, wipe excess off chain to minimize attraction of dirt and grime - Finish Line's Wet Lubricant delivers the ultimate in lubricity and protection. It requires a little more attention to drivetrain cleanliness compared to Finish Line's Dry or Wax lubes.

Finish Line's Pro Chain Cleaner Rebuild Kit contains all the parts you need to bring your Pro Chain Cleaner (sold separately) back to like-new condition. This kit includes three new brush wheels, new axles, and two new scrubber pads.

Designed to leave zero residue after application, Finish Line’s Bicycle Disc Brake Cleaner displaces any moisture built up on the pad or rotor, resulting in improved and predictable braking, and reduced brake squeal. With the unique characteristic of being acetone free, Finish Line’s Bicycle Disc Brake Cleaner is strong enough to clean the dirtiest rotors, yet safe enough to use around paint, carbon fiber and plastic parts. - Engineered to rapidly clean disc brake rotors and pads - Acetone-free formula

Help your bearings run smoother and longer with Finish Line's Ceramic Grease. Its special blend of ceramic particles, Teflon and synthetic oils helps lube your bearings and dissipate heat, guaranteeing longer life and better function. Plus, it works great on stems, posts, cables and other threaded assemblies, too. - Optimizes performance and efficiency of bottom brackets, hubs and headset bearings - Use on stems, seat posts, cables and any threaded assemblies - Prevents rusting even when exposed to salt water - Clear and non-staining

Finish Line's DOT 5.1 Brake Fluid is a high-quality fluid for maximum life and braking power. It exceeds the most stringent 5.1 specs and is compatible/mixable with all DOT 3, 4 or 5.1 spec'd systems. It also features a super-low viscosity to yield superior lever response and pad retraction. Plus, it won't foam up even on long, challenging downhills.

E-Bike Cleaner is formulated to remove grit and grime from frames, wheels and components of e-Bikes. To ensure a clean e-Bike while not damaging expensive electronic components, Finish Line engineered a clinging foam cleaner that is gentle, noncaustic, leaves no streaks, and requires no water rinsing. Finish Line’s e-Bike Cleaner is an ideal complement to any dealer specializing in e-bike sales and service.

Finish Line's Fiber Grip Assembly Gel is specially designed to create friction and reduce slippage between clamped carbon fiber surfaces. It eliminates the need to over tighten clamps to achieve secure connections. Plus, it's been tested and approved by leading carbon fiber component manufacturers.